StandardDev
SCPI Commands :
READ:LTE:MEASurement<Instance>:PRACh:MODulation:SDEViation
FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:SDEViation
- class StandardDevCls[source]
StandardDev commands group definition. 2 total commands, 0 Subgroups, 2 group commands
- class ResultData[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Unit: %
Evm_Rms_Low: float: float EVM RMS value, low EVM window position. Unit: %
Evm_Rms_High: float: float EVM RMS value, high EVM window position. Unit: %
Evm_Peak_Low: float: float EVM peak value, low EVM window position. Unit: %
Evm_Peak_High: float: float EVM peak value, high EVM window position. Unit: %
Mag_Error_Rms_Low: float: float Magnitude error RMS value, low EVM window position. Unit: %
Mag_Error_Rms_High: float: float Magnitude error RMS value, low EVM window position. Unit: %
Mag_Error_Peak_Low: float: float Magnitude error peak value, low EVM window position. Unit: %
Mag_Err_Peak_High: float: float Magnitude error peak value, high EVM window position. Unit: %
Ph_Error_Rms_Low: float: float Phase error RMS value, low EVM window position. Unit: deg
Ph_Error_Rms_High: float: float Phase error RMS value, high EVM window position. Unit: deg
Ph_Error_Peak_Low: float: float Phase error peak value, low EVM window position. Unit: deg
Ph_Error_Peak_High: float: float Phase error peak value, high EVM window position. Unit: deg
Frequency_Error: float: float Carrier frequency error. Unit: Hz
Timing_Error: float: float Transmit time error. Unit: Ts (basic LTE time unit)
Tx_Power: float: float User equipment power. Unit: dBm
Peak_Power: float: float User equipment peak power. Unit: dBm
- fetch() ResultData [source]
# SCPI: FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:SDEViation value: ResultData = driver.prach.modulation.standardDev.fetch()
Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:LTE:MEASurement<Instance>:PRACh:MODulation:SDEViation value: ResultData = driver.prach.modulation.standardDev.read()
Return the current, average and standard deviation single-value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.