Extreme
SCPI Commands :
READ:LTE:MEASurement<Instance>:PRACh:MODulation:EXTReme
FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:EXTReme
CALCulate:LTE:MEASurement<Instance>:PRACh:MODulation:EXTReme
- class ExtremeCls[source]
Extreme commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Unit: %
Evm_Rms_Low: float or bool: float EVM RMS value, low EVM window position Unit: %
Evm_Rms_High: float or bool: float EVM RMS value, high EVM window position Unit: %
Evm_Peak_Low: float or bool: float EVM peak value, low EVM window position Unit: %
Evm_Peak_High: float or bool: float EVM peak value, high EVM window position Unit: %
Mag_Error_Rms_Low: float or bool: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Rms_High: float or bool: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Peak_Low: float or bool: float Magnitude error peak value, low EVM window position Unit: %
Mag_Err_Peak_High: float or bool: float Magnitude error peak value, high EVM window position Unit: %
Ph_Error_Rms_Low: float or bool: float Phase error RMS value, low EVM window position Unit: deg
Ph_Error_Rms_High: float or bool: float Phase error RMS value, high EVM window position Unit: deg
Ph_Error_Peak_Low: float or bool: float Phase error peak value, low EVM window position Unit: deg
Ph_Error_Peak_High: float or bool: float Phase error peak value, high EVM window position Unit: deg
Frequency_Error: float or bool: float Carrier frequency error Unit: Hz
Timing_Error: float or bool: float Time error Unit: Ts (basic LTE time unit)
Tx_Power_Minimum: float or bool: float Minimum user equipment power Unit: dBm
Tx_Power_Maximum: float or bool: float Maximum user equipment power Unit: dBm
Peak_Power_Min: float or bool: float Minimum user equipment peak power Unit: dBm
Peak_Power_Max: float or bool: float Maximum user equipment peak power Unit: dBm
- class ResultData[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Unit: %
Evm_Rms_Low: float: float EVM RMS value, low EVM window position Unit: %
Evm_Rms_High: float: float EVM RMS value, high EVM window position Unit: %
Evm_Peak_Low: float: float EVM peak value, low EVM window position Unit: %
Evm_Peak_High: float: float EVM peak value, high EVM window position Unit: %
Mag_Error_Rms_Low: float: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Rms_High: float: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Peak_Low: float: float Magnitude error peak value, low EVM window position Unit: %
Mag_Err_Peak_High: float: float Magnitude error peak value, high EVM window position Unit: %
Ph_Error_Rms_Low: float: float Phase error RMS value, low EVM window position Unit: deg
Ph_Error_Rms_High: float: float Phase error RMS value, high EVM window position Unit: deg
Ph_Error_Peak_Low: float: float Phase error peak value, low EVM window position Unit: deg
Ph_Error_Peak_High: float: float Phase error peak value, high EVM window position Unit: deg
Frequency_Error: float: float Carrier frequency error Unit: Hz
Timing_Error: float: float Time error Unit: Ts (basic LTE time unit)
Tx_Power_Minimum: float: float Minimum user equipment power Unit: dBm
Tx_Power_Maximum: float: float Maximum user equipment power Unit: dBm
Peak_Power_Min: float: float Minimum user equipment peak power Unit: dBm
Peak_Power_Max: float: float Maximum user equipment peak power Unit: dBm
- calculate() CalculateStruct [source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:PRACh:MODulation:EXTReme value: CalculateStruct = driver.prach.modulation.extreme.calculate()
Returns the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() ResultData [source]
# SCPI: FETCh:LTE:MEASurement<Instance>:PRACh:MODulation:EXTReme value: ResultData = driver.prach.modulation.extreme.fetch()
Returns the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:LTE:MEASurement<Instance>:PRACh:MODulation:EXTReme value: ResultData = driver.prach.modulation.extreme.read()
Returns the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.