Nrb
SCPI Commands :
CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB:PSCCh
CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB:PSSCh
CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB
- class NrbCls[source]
Nrb commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- get_pscch() int [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB:PSCCh value: int = driver.configure.multiEval.rbAllocation.nrb.get_pscch()
Specifies the number of allocated RBs for the PSCCH in the measured slot. For manual RB allocation definition, for sidelink signals.
- return:
no_rb: numeric The value is fixed. Range: 2 to 2
- get_pssch() int [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB:PSSCh value: int = driver.configure.multiEval.rbAllocation.nrb.get_pssch()
Specifies the number of allocated RBs for the PSSCH in the measured slot. For manual RB allocation definition, for sidelink signals.
- return:
no_rb: numeric For the allowed input range, see ‘Sidelink resource block allocation’.
- get_value() int [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB value: int = driver.configure.multiEval.rbAllocation.nrb.get_value()
Specifies the number of allocated RBs in the measured slot. For manual RB allocation definition, for uplink signals without multi-cluster allocation.
- return:
no_rb: numeric For the allowed input range, see ‘Uplink resource block allocation’.
- set_pscch(no_rb: int) None [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB:PSCCh driver.configure.multiEval.rbAllocation.nrb.set_pscch(no_rb = 1)
Specifies the number of allocated RBs for the PSCCH in the measured slot. For manual RB allocation definition, for sidelink signals.
- param no_rb:
numeric The value is fixed. Range: 2 to 2
- set_pssch(no_rb: int) None [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB:PSSCh driver.configure.multiEval.rbAllocation.nrb.set_pssch(no_rb = 1)
Specifies the number of allocated RBs for the PSSCH in the measured slot. For manual RB allocation definition, for sidelink signals.
- param no_rb:
numeric For the allowed input range, see ‘Sidelink resource block allocation’.
- set_value(no_rb: int) None [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:RBALlocation:NRB driver.configure.multiEval.rbAllocation.nrb.set_value(no_rb = 1)
Specifies the number of allocated RBs in the measured slot. For manual RB allocation definition, for uplink signals without multi-cluster allocation.
- param no_rb:
numeric For the allowed input range, see ‘Uplink resource block allocation’.