Modulation
SCPI Command :
CONFigure:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:MODulation
- class ModulationCls[source]
Modulation commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- class ModulationStruct[source]
Structure for setting input parameters. Fields:
Mod_Statistics: int: integer Statistical length in slots. Range: 1 to 1000
Modenable: bool: OFF | ON Enable or disable the measurement of modulation results. ON: Modulation results are measured according to the other enable flags in this command. Modulation results for which there is no explicit enable flag are also measured (e.g. I/Q offset, frequency error and timing error) . OFF: No modulation results at all are measured. The other enable flags in this command are ignored.
Evm_Enable: bool: OFF | ON Enable or disable measurement of EVM.
Mag_Error_Enable: bool: OFF | ON Enable or disable measurement of magnitude error.
Phase_Err_Enable: bool: OFF | ON Enable or disable measurement of phase error.
Ib_Eenable: bool: OFF | ON Enable or disable measurement of inband emissions.
Eq_Sp_Flat_Enable: bool: OFF | ON Enable or disable measurement of equalizer spectrum flatness results.
Mod_Scheme: enums.ModScheme: AUTO | QPSK | Q16 | Q64 | Q256 Modulation scheme used by the LTE uplink signal. AUTO: automatic detection QPSK: QPSK Q16: 16-QAM Q64: 64-QAM Q256: 256-QAM
- get(segment=Segment.Default) ModulationStruct [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:MODulation value: ModulationStruct = driver.configure.multiEval.listPy.segment.modulation.get(segment = repcap.Segment.Default)
Defines settings for modulation measurements in list mode for segment <no>.
- param segment:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)
- return:
structure: for return value, see the help for ModulationStruct structure arguments.
- set(structure: ModulationStruct, segment=Segment.Default) None [source]
# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:MODulation structure = driver.configure.multiEval.listPy.segment.modulation.ModulationStruct() structure.Mod_Statistics: int = 1 structure.Modenable: bool = False structure.Evm_Enable: bool = False structure.Mag_Error_Enable: bool = False structure.Phase_Err_Enable: bool = False structure.Ib_Eenable: bool = False structure.Eq_Sp_Flat_Enable: bool = False structure.Mod_Scheme: enums.ModScheme = enums.ModScheme.AUTO driver.configure.multiEval.listPy.segment.modulation.set(structure, segment = repcap.Segment.Default)
Defines settings for modulation measurements in list mode for segment <no>.
- param structure:
for set value, see the help for ModulationStruct structure arguments.
- param segment:
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)