Ocombination

SCPI Command :

CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:SEMask:LIMit<nr>:ADDitional<Table>:CAGGregation:OCOMbination

class OcombinationCls

Ocombination commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class OcombinationStruct

Response structure. Fields:

• Enable: bool: OFF | ON OFF: Disables the check of these requirements. ON: Enables the check of these requirements.

• Frequency_Start: float: numeric Start frequency of the area, relative to the edges of the aggregated channel bandwidth. Range: 0 MHz to 65 MHz, Unit: Hz

• Frequency_End: float: numeric Stop frequency of the area, relative to the edges of the aggregated channel bandwidth. Range: 0 MHz to 65 MHz, Unit: Hz

• Level: float: numeric Upper limit for the area. Range: -256 dBm to 256 dBm, Unit: dBm

• Rbw: enums.Rbw: K030 | K100 | M1 Resolution bandwidth to be used for the area. K030: 30 kHz K100: 100 kHz M1: 1 MHz

get(limit=Limit.Default, table=Table.Default) → OcombinationStruct

# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:SEMask:LIMit<nr>:ADDitional<Table>:CAGGregation:OCOMbination
value: OcombinationStruct = driver.configure.multiEval.limit.seMask.limit.additional.carrierAggregation.ocombination.get(limit = repcap.Limit.Default, table = repcap.Table.Default)

Defines additional requirements for the emission mask area <no>. The activation state, the area borders, an upper limit and the resolution bandwidth must be specified. The settings apply to all ‘other’ channel bandwidth combinations, not covered by other commands in this chapter.

param limit:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)

param table:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Additional’)

return:

structure: for return value, see the help for OcombinationStruct structure arguments.

set(enable: bool, frequency_start: float, frequency_end: float, level: float, rbw: Rbw, limit=Limit.Default, table=Table.Default) → None

# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:SEMask:LIMit<nr>:ADDitional<Table>:CAGGregation:OCOMbination
driver.configure.multiEval.limit.seMask.limit.additional.carrierAggregation.ocombination.set(enable = False, frequency_start = 1.0, frequency_end = 1.0, level = 1.0, rbw = enums.Rbw.K030, limit = repcap.Limit.Default, table = repcap.Table.Default)

Defines additional requirements for the emission mask area <no>. The activation state, the area borders, an upper limit and the resolution bandwidth must be specified. The settings apply to all ‘other’ channel bandwidth combinations, not covered by other commands in this chapter.

param enable:

OFF | ON OFF: Disables the check of these requirements. ON: Enables the check of these requirements.

param frequency_start:

numeric Start frequency of the area, relative to the edges of the aggregated channel bandwidth. Range: 0 MHz to 65 MHz, Unit: Hz

param frequency_end:

numeric Stop frequency of the area, relative to the edges of the aggregated channel bandwidth. Range: 0 MHz to 65 MHz, Unit: Hz

param level:

numeric Upper limit for the area. Range: -256 dBm to 256 dBm, Unit: dBm

param rbw:

K030 | K100 | M1 Resolution bandwidth to be used for the area. K030: 30 kHz K100: 100 kHz M1: 1 MHz

param limit:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)

param table:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Additional’)