Perror

SCPI Command :

CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:QPSK:PERRor

class PerrorCls

Perror commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class PerrorStruct

Response structure. Fields:

• Rms: float or bool: numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.

• Peak: float or bool: numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.

get() → PerrorStruct

# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:QPSK:PERRor
value: PerrorStruct = driver.configure.multiEval.limit.qpsk.perror.get()

Defines symmetric limits for the RMS and peak values of the phase error for QPSK. The limit check fails if the absolute value of the measured phase error exceeds the specified values.

return:

structure: for return value, see the help for PerrorStruct structure arguments.

set(rms: float, peak: float) → None

# SCPI: CONFigure:LTE:MEASurement<Instance>:MEValuation:LIMit:QPSK:PERRor
driver.configure.multiEval.limit.qpsk.perror.set(rms = 1.0, peak = 1.0)

Defines symmetric limits for the RMS and peak values of the phase error for QPSK. The limit check fails if the absolute value of the measured phase error exceeds the specified values.

param rms:

(float or boolean) numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.

param peak:

(float or boolean) numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.