Average

SCPI Commands :

READ:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
FETCh:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
CALCulate:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits. Unit: %

  • Obw: float or bool: float Occupied bandwidth Unit: Hz

  • Tx_Power: float or bool: float Total TX power in the slot over all component carriers Unit: dBm

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for spectrum emission measurements exceeding the specified spectrum emission mask limits. Unit: %

  • Obw: float: float Occupied bandwidth Unit: Hz

  • Tx_Power: float: float Total TX power in the slot over all component carriers Unit: dBm

calculate() → CalculateStruct[source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
value: CalculateStruct = driver.multiEval.seMask.average.calculate()

Return the current, average and standard deviation single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
value: ResultData = driver.multiEval.seMask.average.fetch()

Return the current, average and standard deviation single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:LTE:MEASurement<Instance>:MEValuation:SEMask:AVERage
value: ResultData = driver.multiEval.seMask.average.read()

Return the current, average and standard deviation single-value results of the spectrum emission measurement. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.