Extreme
SCPI Commands :
READ:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
FETCh:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
CALCulate:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme
- class ExtremeCls[source]
Extreme commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Unit: %
Evm_Rms_Low: float or bool: float EVM RMS value, low EVM window position Unit: %
Evm_Rms_High: float or bool: float EVM RMS value, high EVM window position Unit: %
Evm_Peak_Low: float or bool: float EVM peak value, low EVM window position Unit: %
Evm_Peak_High: float or bool: float EVM peak value, high EVM window position Unit: %
Mag_Error_Rms_Low: float or bool: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Rms_High: float or bool: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Peak_Low: float or bool: float Magnitude error peak value, low EVM window position Unit: %
Mag_Err_Peak_High: float or bool: float Magnitude error peak value, high EVM window position Unit: %
Ph_Error_Rms_Low: float or bool: float Phase error RMS value, low EVM window position Unit: deg
Ph_Error_Rms_High: float or bool: float Phase error RMS value, high EVM window position Unit: deg
Ph_Error_Peak_Low: float or bool: float Phase error peak value, low EVM window position Unit: deg
Ph_Error_Peak_High: float or bool: float Phase error peak value, high EVM window position Unit: deg
Iq_Offset: float or bool: float I/Q origin offset Unit: dBc
Frequency_Error: float or bool: float Carrier frequency error Unit: Hz
Timing_Error: float or bool: float Time error Unit: Ts (basic LTE time unit)
Tx_Power_Minimum: float or bool: float Minimum user equipment power Unit: dBm
Tx_Power_Maximum: float or bool: float Maximum user equipment power Unit: dBm
Peak_Power_Min: float or bool: float Minimum user equipment peak power Unit: dBm
Peak_Power_Max: float or bool: float Maximum user equipment peak power Unit: dBm
Psd_Minimum: float or bool: No parameter help available
Psd_Maximum: float or bool: No parameter help available
Evm_Dmrs_Low: float or bool: float EVM DMRS value, low EVM window position Unit: %
Evm_Dmrs_High: float or bool: float EVM DMRS value, high EVM window position Unit: %
Mag_Err_Dmrs_Low: float or bool: float Magnitude error DMRS value, low EVM window position Unit: %
Mag_Err_Dmrs_High: float or bool: float Magnitude error DMRS value, high EVM window position Unit: %
Ph_Error_Dmrs_Low: float or bool: float Phase error DMRS value, low EVM window position Unit: deg
Ph_Error_Dmrs_High: float or bool: float Phase error DMRS value, high EVM window position Unit: deg
Iq_Gain_Imbalance: float or bool: float Gain imbalance Unit: dB
Iq_Quadrature_Err: float or bool: float Quadrature error Unit: deg
Evm_Srs: float: float Error vector magnitude result for SRS signals Unit: %
- class ResultData[source]
Response structure. Fields:
Out_Of_Tolerance: int: decimal Out of tolerance result, i.e. percentage of measurement intervals of the statistic count for modulation measurements exceeding the specified modulation limits. Unit: %
Evm_Rms_Low: float: float EVM RMS value, low EVM window position Unit: %
Evm_Rms_High: float: float EVM RMS value, high EVM window position Unit: %
Evm_Peak_Low: float: float EVM peak value, low EVM window position Unit: %
Evm_Peak_High: float: float EVM peak value, high EVM window position Unit: %
Mag_Error_Rms_Low: float: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Rms_High: float: float Magnitude error RMS value, low EVM window position Unit: %
Mag_Error_Peak_Low: float: float Magnitude error peak value, low EVM window position Unit: %
Mag_Err_Peak_High: float: float Magnitude error peak value, high EVM window position Unit: %
Ph_Error_Rms_Low: float: float Phase error RMS value, low EVM window position Unit: deg
Ph_Error_Rms_High: float: float Phase error RMS value, high EVM window position Unit: deg
Ph_Error_Peak_Low: float: float Phase error peak value, low EVM window position Unit: deg
Ph_Error_Peak_High: float: float Phase error peak value, high EVM window position Unit: deg
Iq_Offset: float: float I/Q origin offset Unit: dBc
Frequency_Error: float: float Carrier frequency error Unit: Hz
Timing_Error: float: float Time error Unit: Ts (basic LTE time unit)
Tx_Power_Minimum: float: float Minimum user equipment power Unit: dBm
Tx_Power_Maximum: float: float Maximum user equipment power Unit: dBm
Peak_Power_Min: float: float Minimum user equipment peak power Unit: dBm
Peak_Power_Max: float: float Maximum user equipment peak power Unit: dBm
Psd_Minimum: float: No parameter help available
Psd_Maximum: float: No parameter help available
Evm_Dmrs_Low: float: float EVM DMRS value, low EVM window position Unit: %
Evm_Dmrs_High: float: float EVM DMRS value, high EVM window position Unit: %
Mag_Err_Dmrs_Low: float: float Magnitude error DMRS value, low EVM window position Unit: %
Mag_Err_Dmrs_High: float: float Magnitude error DMRS value, high EVM window position Unit: %
Ph_Error_Dmrs_Low: float: float Phase error DMRS value, low EVM window position Unit: deg
Ph_Error_Dmrs_High: float: float Phase error DMRS value, high EVM window position Unit: deg
Iq_Gain_Imbalance: float: float Gain imbalance Unit: dB
Iq_Quadrature_Err: float: float Quadrature error Unit: deg
Evm_Srs: float: float Error vector magnitude result for SRS signals Unit: %
- calculate() CalculateStruct [source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme value: CalculateStruct = driver.multiEval.modulation.extreme.calculate()
Return the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
Use RsCmwLteMeas.reliability.last_value to read the updated reliability indicator.
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() ResultData [source]
# SCPI: FETCh:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme value: ResultData = driver.multiEval.modulation.extreme.fetch()
Return the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
Use RsCmwLteMeas.reliability.last_value to read the updated reliability indicator.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:LTE:MEASurement<Instance>:MEValuation:MODulation:EXTReme value: ResultData = driver.multiEval.modulation.extreme.read()
Return the extreme single value results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
Use RsCmwLteMeas.reliability.last_value to read the updated reliability indicator.
- return:
structure: for return value, see the help for ResultData structure arguments.