Average

SCPI Commands :

FETCh:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
CALCulate:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
class AverageCls[source]

Average commands group definition. 2 total commands, 0 Subgroups, 2 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Seg_Reliability: int: decimal Reliability indicator for the segment

  • Statist_Expired: int: decimal Reached statistical length in slots

  • Out_Of_Tolerance: int: decimal Percentage of measured subframes with failed limit check Unit: %

  • Obw: float or bool: float Occupied bandwidth Unit: Hz

  • Tx_Power: float or bool: float Total TX power in the slot Unit: dBm

class FetchStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Seg_Reliability: int: decimal Reliability indicator for the segment

  • Statist_Expired: int: decimal Reached statistical length in slots

  • Out_Of_Tolerance: int: decimal Percentage of measured subframes with failed limit check Unit: %

  • Obw: float: float Occupied bandwidth Unit: Hz

  • Tx_Power: float: float Total TX power in the slot Unit: dBm

calculate(segment=Segment.Default) → CalculateStruct[source]
# SCPI: CALCulate:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
value: CalculateStruct = driver.multiEval.listPy.segment.seMask.average.calculate(segment = repcap.Segment.Default)

Return spectrum emission single value results for segment <no> in list mode. The values described below are returned by FETCh commands. The first four values (reliability to out-of-tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.

param segment:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(segment=Segment.Default) → FetchStruct[source]
# SCPI: FETCh:LTE:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:SEMask:AVERage
value: FetchStruct = driver.multiEval.listPy.segment.seMask.average.fetch(segment = repcap.Segment.Default)

Return spectrum emission single value results for segment <no> in list mode. The values described below are returned by FETCh commands. The first four values (reliability to out-of-tolerance result) are also returned by CALCulate commands. The remaining values returned by CALCulate commands are limit check results, one value for each result listed below.

param segment:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

structure: for return value, see the help for FetchStruct structure arguments.