Perror

SCPI Command :

CONFigure:LTE:MEASurement<Instance>:PRACh:LIMit:PERRor

class PerrorCls

Perror commands group definition. 1 total commands, 0 Subgroups, 1 group commands

class PerrorStruct

Response structure. Fields:

• 1 Rms: float | bool: numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.

• 2 Peak: float | bool: numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.

get() → PerrorStruct

CONFigure:LTE:MEASurement<Instance>:PRACh:LIMit:PERRor

Snippet: value: PerrorStruct = driver.configure.prach.limit.perror.get()

Defines symmetric limits for the RMS and peak values of the phase error. The limit check fails if the absolute value of the measured phase error exceeds the specified limit.

return:

structure: for return value, see the help for PerrorStruct structure arguments.

set(rms: float | bool, peak: float | bool) → None

CONFigure:LTE:MEASurement<Instance>:PRACh:LIMit:PERRor

Snippet: driver.configure.prach.limit.perror.set(rms = 1.0, peak = 1.0)

Defines symmetric limits for the RMS and peak values of the phase error. The limit check fails if the absolute value of the measured phase error exceeds the specified limit.

param rms:

(float or boolean) numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.

param peak:

(float or boolean) numeric | ON | OFF Range: 0 deg to 180 deg, Unit: deg ON | OFF enables or disables the limit check.